BasicMicro - Forums

With a say AtomPro 40, can one have pins
9 to 15 running at differant frequencies/duty cycles
while being able to manipulate the remaining pins
(preferably a group of them as a port) ?
Thank You,
Michael Miller

On the AtomPro40 you can have 2 different frequencies. 9,10,11 must be at one freq(but can be at different duty) and 13,14,15 can be at a different freq from 9,10 and 11. On AtomPro28/24 modules the 3 PWM pins must be at the same freq(but again can be at different duty).

_________________
Tech Support
Basic Micro - Robotic Technology Evolved